technical parameterMaximum wind resistance: 42m/s
Maximum snow resistance: 1KN/m2
Span range: 0.6-2.5m
System installation angle deviation: ± 2 °
Adjustable angle: 10-15, 15-30, 30-60
Design standard: AS/NZS1170 ASCE 7-05 DIN1044, etc.
Performance parameterInstallation site: cement flat roof
Body material: AL6005-T5
Fastener material: SUS304
Applicable components: framed
Applicable arrangement: tandem
Warranty period: 10 years
Bracket System Components
Product Features
- Easy installation
Well-designed brackets and components do not require on-site cutting and welding, and fewer on-site installation procedures, effectively improving installation efficiency. - Strong compatibility
The adjustable bracket system can meet the installation requirements of different specifications of PV modules. At the same time, it is compatible with the different arrangement of components. - Safe and reliable
The frame system is made of high quality aluminum alloy and stainless steel to prevent corrosion and oxidation. The product can be recycled to reduce environmental pollution. The overall structure fully considers the factors of load bearing, wind resistance, snow resistance, earthquake resistance, etc., and has been calculated and tested to ensure safety and reliability.
Installation instructions
step1、Mounting tripod
Install the triangle on the cement foundation with the bolts embedded and tighten all the bolts on the bolt tripod. As shown in Figure 1 (left); the track pallet is mounted on a tripod, and the bolts on the pallet are temporarily pre-locked, Figure 2 (right).
step2、Mounting track
Align the track with the block on the pallet and slide the track inward along the block. After adjusting the distance, the rail will be locked and the bolts of the bracket will be locked. Figure 4, Figure 5
step3、Installation component
Tile the components on the rails, adjust the dimensions, and secure the components with side and intermediate pressure blocks. Figure 6, Figure 7
Case show
